Norbury Poly-Vinyl Shutters

Poly Vinyl Shutters

Whether a home is newly yours or you’re just sprucing it up, these handcrafted shutters add beauty and value to it that will endure. The money and time saved with a quick and easy DIY installation is by design – down to every detail with you in mind.

From the pre-drilled frames and easy-to-follow labels, to the durable materials and warranty, these shutters can get started lasting you a lifetime.

SHOP NOW

Request for Samples

CLICK HERE

Colors

Vivid White

Snow White

Bright White

Classic White

Vanilla

Lexicon

Pure White

Louver Sizes

2.5"

3.5"

4.5"

INVISA-TILT

TILT BAR

Clear View

Motorized Louver

How to Measure

Use a Metal Measuring Tape (Cloth Tapes May Stretch)

Inside Mount

shades are installed inside the window frame.

Width

Measure the exact width of the inside edges of the window frame from three different places: at the top, middle, and bottom to the nearest 1/8". Record the narrowest (smallest) measurement.
DO NOT take off any deductions. The factory will take off necessary deductions for a perfect fit.
Tip to tip width deduction = 1/4"

Height

Measure the exact height of the inside edges of the window frame from three different places; at the left, center, and right to the nearest 1/8".
Record the longest of the three measurements.

Outside Mount

shades are installed outside the window frame, covering an area bigger than the window size.

Width

Measure the exact height to be covered, including the top edge of molding to the bottom edge. It is recommended adding at least 2" on top and 2" to the bottom (4" total overlap) to provide the maximum light gap coverage and space for wall mount bracket installation.

Height

Measure the exact height to be covered, including the top edge of molding to the bottom edge. It is recommended adding at least 2" on top and 2" to the bottom (4" total overlap) to provide the maximum light gap coverage and space for wall mount bracket installation.